Translation provided by Google

Name	Code	Description	Region
Fiber Quality Analyzer - 360 (FQA-360)	LDA17	The FQA rapidly and accurately measures fiber length, width, curl, % numeric fines and kink...	Worldwide
OpTiBlend (OTB)	LDC09	The OpTiBlend (OTB) software estimates the mass ratio of pulp species in an unknown blend...	Worldwide
KRK High-consistency Disc Refiner	KRK-2500-I	The refiner is one of basic machines used in test and research area of pulp...	US/Can/Mex
KRK Continuous High-consistency Refiner	KRK-2500-II	This refiner, like the NO.2500-I, has been developed for continuous...	US/Can/Mex
Refining Plates for KRK 2500 Series Refiners	KRK-2501	The pattern and material of the plate has a close relationship with not...	US/Can/Mex
KRK Pressurized Refiner	KRK-2503	Since there is a keen demand for resource saving and no pollution in the world...	US/Can/Mex
Niagara Beater	KRK-2505	This machine is widely used as a standard tester per JIS and TAPPI. Unlike...	US/Can/Mex
Niagara Beater with Wash Drum	KRK-2506	This machine is widely used as a standard tester per JIS and TAPPI. Unlike...	US/Can/Mex
PFI Mill (Automatic Type)	KRK-2511	Like the standard type, this machine is a beater featuring high reproducibility...	US/Can/Mex
Chest (Specimen Storage or Blending - 300L)	KRK-2525	The chest is usually used for storage and blending of specimens.	US/Can/Mex
Mechanochemical Pupling Machine	KRK-2526	For resource and energy saving, reuse of waste paper is promoted...	US/Can/Mex
High-consistency Disintegrator	KRK-2528	A considerable amount of waste paper is used as low cost material...	US/Can/Mex
Pulp Disintegrator (Stepless Speed Change Type)	KRK-2529	This machine disintegrates the pulp into single fibers, by rotating the pulp...	US/Can/Mex
Large Size Pulp Disintegrator (10L or 30L)	KRK-2531	This machine is used in the same manner as the standard pulp disintegrator...	US/Can/Mex
Standard Pulp Disintegrator	KRK-2532	This machine disintegrates the pulp into single fibers. by rotating the pulp...	US/Can/Mex
Large Size Pulper	KRK-2534	This is a small type simulating the pulper used in the paper mill. It rapidly...	US/Can/Mex
Pulp Defibrator	KRK-2535-I	This machine efficiently disintegrates the material into flocs, maintaining...	US/Can/Mex
Wet Pulp Defibrator	KRK-2535-II	This machine has been developed for rapidly disintegrating wet pulp...	US/Can/Mex
Centrifugal Pulp Dehydrator (Stationary Type)	KRK-2536	This machine dehydrates paper stock by centrifugal force. All the sections...	US/Can/Mex
Large Size Centrifugal Pulp Dehydrator (Suspended on Three Legs)	KRK-2537	This machine rapidly dehydrates pulp slurry. Unique suspended design...	US/Can/Mex
Centrifugal Separator for Measurement of Water Retention Value of Pulp	KRK-2538	Measurement of pulp swelling degree by centrifugal force is a method...	US/Can/Mex
Semi-automatic Sheet Former	KRK-2542-A	This machine automatically performs all steps, water feed, agitation...	US/Can/Mex
KRK Pneumatic Type Standard Sheet Former	KRK-2542-B	The conventional paper handmaking needs much labor for agitation...	US/Can/Mex
Oriented Sheet Former (Experimental Type)	KRK-2543	The pulp and paper industry has been confronted with diverse problems...	US/Can/Mex
TAPPI Standard Sheet Former	KRK-2545	It is necessary to make specimens in different conditions, to study...	US/Can/Mex
Sheet Press	KRK-2546	This machine rapidly dewaters the paper sheet after couching, which...	US/Can/Mex
Sheet Machine Dryer (Air Type)	KRK-2547	This dryer conditions the humidity of pressed paper made by the shee...	US/Can/Mex
TAPPI Standard Sheet Former (Improved Type)	KRK-2548	This is an improved version of the standard sheet machine, for alleviating...	US/Can/Mex
Large Size Sheet Former (400mm Square)	KRK-2553	The standard square sheet machine has been widely used. Its capability...	US/Can/Mex
Square Sheet Former (250mm Square)	KRK-2555	Like the standard sheet machine, this machine rapidly makes specimen...	US/Can/Mex

Start
Prev
1
2
3
Next
End

Scroll