Pulp and Fibrous Materials - OpTest [3/3]

This autoclave is for timber chip cooking tests in a university laboratory, etc...

This equipment is used for isolating digested pulp and measuring knots...

This equipment is used for isolating digested pulp and measuring knots...

This screen is used for measurement of the content of chunky fibers in GP...

This press couches and squeezes water out of paper sheets produced...

For use in the laboratory for beating of chemical pulps under standardized...

Beat pulp in accordance with standardized conditions

Instrument for determining the fiber length distribution of pulp samples. 

The PTA Laboratory Disc Refiner provides results like the results obtained in production refining.

Wood chips classifier of 4 or 5 trays of different sizes to control the operation of woodchippers.

The Sheet Former is intended for installation on a laboratory bench (not included)...

The automatic sheet former produces 159 mm diameter hand-sheets.

For de-watering and pressing of hand-sheets produced on sheet machines according to TAPPI or SCAN.

Compact Pulper for defibration of dry samples in laboratory scale.

For determination of shives and other particles in pulp suspensions.

For the determination of the water retention ability of pulp samples. Water retention value (WRV) test.

For the standardized disintegration of pulp suspension.

For the rapid drying of hand sheets and for determining the dry content of other materials.

For the determination of the degree of refining (beating) of a pulp suspension...

Instrument to determining the pulps refining degrees, according to the Canadian method.

Produce standardized paper sheets in the laboratory (200 mm diameter)

For the production of standard paper sheets (Ø 159 mm / 6 ¼ inch).