Paper, Tissue, & Board - OpTest [4/5]

The Vertical Laboratory Fluter is manufactured with a straight channeling ...

Equipment used to determine the resistance of a sample of standardized...

Elmendorf tearing tester machine to test the tear in paper. 

Strip cutter for the preparation of paper, or board, samples for tensile tests.

To measure the air permeability and surface roughness according to Bendtsen method...

For measuring the smoothness of the papers according to Bekk method...

To determine the paper porosity according to Gurley method

For punching strips for the tensile tests or for the RCT Tests.

Preparation of sample strips on paper, plastic film, and other materials.

For measuring the required energy to puncture corrugated board and cardboard.

Determination of the compression resistance per length unit on Liner...

For the determination of bending resistance and bending stiffness of paper and paperboard.

The digital counter bench has been designed to measure any type of tissue roll wound...

This attachment is recommended for the Universal Tensile Tester (PTA-0301XX) ...

The wet shear automatic instrument is a variation of the TAPPI T 842 standard...

To measure the thickness of paper.

To measure the thickness of board.

Pneumatic sample punches for the preparation of 100 cm² round samples (or smaller).

For measurement of the air permeability of one sheet of paper according to the Schopper method.

Measures the static friction coefficient.

For easy and fast preparation cutting of samples for bending stiffness and Elmendorf tearing tests.

Measures the air permeability and surface roughness according to Bendtsen.

Cutter for corrugated board samples 100 or 50 cm² circular for FCT test and grammage.

For the evaluation of the stiffness according to the resonance length method.

Used to simultaneously cut several test pieces of variable width (the edges being parallel).

For cutting 100 cm² circular paper samples to assess grammage.

Cuts samples of corrugated cardboard up to a thickness of 20 mm for ECT test.

This instrument is used to measure the water absorption time and the water....

Used for sample preparation for the ECT Crush Test

To measure the water absorbance of paper or board manually (NV100) or with automatic clamping jaws (NV102).